Skip to content
4.9 on Google · 72+ five-star reviews on TrueLocal Family owned for 25 years24/7 emergency · 1300 877 448
1300 877 448
Leaks & Taps

How to Fix a Leaking Tap (Step by Step) and When It’s a Bigger Problem

Why taps leak, how to fix a dripping washer tap or mixer tap step by step, and the signs a leaking tap is a bigger plumbing problem.

By the Plumbers Direct team 22 November 2026

A dripping tap is one of the most common plumbing problems in Sydney homes – and one of the easiest to ignore. But a tap that drips once a second can waste thousands of litres of water a year, and the constant drip is often a sign a part is wearing out. The good news is that many leaking taps can be fixed in under an hour with a few basic tools.

This guide explains why taps leak, how to fix the most common types step by step, and when a leak is a sign of a bigger problem. If you’d rather leave it to a professional, our leaking tap and shower plumbers are available across Sydney on 1300 877 448.

Why do taps leak?

  • Worn washers: older-style taps use a rubber washer that hardens and wears over time. This is the most common cause of a drip from the spout.
  • Worn O-rings: if water leaks from around the handle or the base of the spout, the O-ring seal is usually to blame.
  • Worn or damaged seats: the seat the washer presses against can wear or corrode, so even a new washer won’t seal.
  • Faulty cartridges: mixer taps use a cartridge instead of a washer. When it wears, the tap drips or becomes hard to control.
  • High water pressure: excessive pressure wears tap parts faster and can cause drips and noisy pipes.

What you’ll need

  • An adjustable spanner and a flat-head and Phillips screwdriver
  • Replacement washer, O-ring or cartridge (take the old one to the hardware store to match it)
  • A cloth or old towel, and a plug for the sink so small parts don’t go down the drain
  • Plumber’s grease (optional)

How to fix a leaking tap with a washer (step by step)

1. Turn off the water

Turn off the isolation valve under the sink if there is one, or turn off the water at the main. Open the tap to let any remaining water drain out.

2. Remove the handle

Prise off the decorative cap on top of the handle, undo the screw underneath and lift the handle off.

3. Unscrew the tap body (jumper valve)

Use a spanner to undo the headgear – the brass body under the handle. Wrap the tap in a cloth first so you don’t scratch the finish.

4. Replace the washer

The washer sits on the end of the jumper valve. Remove it, fit the new washer of the same size, and replace the O-ring at the same time if it looks worn.

5. Reassemble and test

Screw the headgear back in firmly (don’t over-tighten), refit the handle, turn the water back on and check for drips. If it still drips, the seat may be worn and need re-facing – a job for a plumber.

How to fix a leaking mixer tap

Mixer taps don’t have washers. Instead, the cartridge inside controls the flow and temperature.

  1. Turn off the water supply and open the tap to release pressure.
  2. Remove the handle – there’s usually a small grub screw under a cap or at the back of the lever.
  3. Unscrew the dome cover and the retaining nut to expose the cartridge.
  4. Pull the cartridge straight out, note how it sits, and take it to the hardware store to buy an exact match.
  5. Fit the new cartridge, reassemble, turn the water on and test.

Cartridges vary by brand and model, so if you can’t find a match, call us and we’ll source the right one.

When a leaking tap is a bigger problem

Call a plumber if:

  • the tap still drips after a new washer or cartridge
  • water is leaking from under the sink, inside the wall or around the base of the tap
  • you can’t turn the water off because the isolation valve or main is stuck
  • several taps are dripping, or your pipes bang when you turn taps off – a sign of high water pressure
  • it’s a leaking shower – shower taps are inside the wall, and a leak there can damage the wall and the room next door

Hidden leaks are more serious than a dripping spout. Read what to do if your ceiling is leaking and our tips on stopping leaks at threaded joints, or see our leak detection service.

Repair or replace the tap?

If your tapware is old, corroded or keeps failing, replacing it can be the better option – especially if you’re updating a kitchen or bathroom. Our guide on how to choose new taps covers what to look for.

Frequently asked questions

How much water does a dripping tap waste?

A tap dripping about once a second can waste thousands of litres a year – and it shows up on your water bill.

Can I fix a leaking tap myself?

Many simple washer and cartridge replacements are DIY-friendly. Leaks inside walls, at pipe connections or in showers are best left to a licensed plumber.

How long does it take a plumber to fix a leaking tap?

Most tap repairs are done in a single visit. Call 1300 877 448 – there’s no call out fee.

Why does my tap still drip after replacing the washer?

The tap seat is probably worn or damaged, so the new washer can’t seal against it. A plumber can re-face the seat or replace the tap.

Need a plumber?

Licensed Sydney plumbers, 24/7 including public holidays, with a $0 call out fee.

1300 877 448
The Plumbers Direct team
Written by the Plumbers Direct team
A family-owned Sydney plumbing business for 25 years, rated 4.9 on Google with 72+ five-star reviews on TrueLocal.
Plumbing emergency?
We're on 24/7.
1300 877 448